Personally I would use ARP stud and nut kit instead of bolts.
As said half moons, use a cometic foam/alloy gasket as is reuseable, use sealant under front cam caps and at ends of half moons, loctite 5900/5910 is best.
Head WILL need skimming and at that mileage very likely new valves/guides.
Take head off with exhaust manifold still on as two nuts a painin the arse to get to, you can get all reuseable cometic for the inlet side as well, apart from the elbow to plenum one.
Give a shout if you need a hand.
tabetha