I have a nice looking Gt35 turbo waiting to go on a yb
What spec would you recommend to make best use of it?
Low compression and loads of boost Or high comp to keep the lag to a minimum if thats possible.
The block's wire rung and will be long studded. Arp's all round on standard crank and rods. Unsure of what pistons and cams to use.
Cheers aaron
A GT35 with a .82ar exhaust housing is a good starting point,
You will need a very good flowing engine to make it work best without surge, Some people claim its not a good turbo but this is down to the way it is being used and them not knowing how to stop the surge,
Compression wont have much effect you can be down to 7-1 or up at 8-1 but you will need to know a bit to have a good package at 8-1.
Mark