Originally Posted by JesseT

I have also mapped several RSTs over the years with MS and can send you some maps if you have some initial problems. However, the tuning software should be able to make you a base map based on some initial figures you feed in. To not even start an engine, the map should be way off.

The 36-1 wheel is not with 36teeth and the 37th mising. It's 36teeth minus 1 missing, thus the 36-1 name. So only 35 actual teeth. The base number of tooth slots makes sense because it makes every tooth count for 10 degrees on the crank and is dividable by 4.
If you have a 4-0 trigger wheel, the management has no way of knowing the engine position and can't know which plug to send a spark to. This trigger wheel will only work with a distributor.