Hi all, I need some help here.

My standard rubber bushes that connect the rear wishbone to the hub are knackered. (all four)

They aren't available through Ford anymore....

Got myself some Powerflex items but they seem to be way to large. (same as my Deflex ones which I bought a few years ago but never fitted because of this problem)

In the wishbones there are metal outer bushes. If I would remove them then maybe the bushes would fit but I'm not sure these can safely be removed.

Did you guys out here removed the metal outer bush to fit polyurethane or do I need a different set of PU bushes? Please let me know what you have done when fitting PU on this joint.

The wishbones by the way are standard S2 items.

All info welcome!!!


Kind regards to all..............