View Single Post
Old May 2, 2008 | 06:04 AM
  #3  
JanDK's Avatar
JanDK
Too many posts.. I need a life!!
iTrader: (3)
 
Joined: Sep 2005
Posts: 767
Likes: 0
From: Denmark
Default

Originally Posted by percybigun
your better off using a genuine ford part thermostat. i never like the "pattern" ones.

mondy v6's are prone to overheating.

try thoroughly flushing and back flushing the cooling system and radiator.

are you sure both fans are kicking in? they are notorious for seizing the fans.

otherwise, are you sure the temp sender is accurate and that the car is really overheating? when the temp guage needle rises high, do you experience bubbling and steaming from the header tank?

or it could be head gasket failure. i'd try the above, then get the heads pressure tested.

BOTH fans can move, allthough I havent checked if both kick in.. it seems like it though.

NO. very hot engine smells.. no steam, no bubbling

I have been advised as you say (as it is a Mondeo24V) to get a FORD termostat and temp.gauge sensor to fit, to ensure they match.

Will check everything once more

Thanks
Reply