cossie0 4
One touch are VERY easy to do, you can use as I did mondeo one touch relays, which can be found in any mondeo, in ALL the drivers doors, a brown unit with a moulded plug onto it, held with two large/ish screws into the door space, about 6" below the mirror area.
To use one for each window you need one unit, you can have one touch up or down, I just did down for safety reasons, they are just a timer basically, easy to wire though to get them all(4) fitted under the centre console/armresty bit you need to cut off the moulded bit and solder the wires direct to the terminals.
If you want to do this, the colours are as follows ,
black to ground,
violet/white with yellow streaks to LIVE,
yellow/violet to motor
yellow/green to switch.
You need to find which wire from the switch goes LIVE when you press for the function you want, ie if you want one touch down, on any window see which wire goes LIVE when the switch is pressed, now cut this wire, and insert in between the one touch relay, with the yellow/green wire going to the SWITCH end of the cut wire, then the yellow/violet wire going to the other cut end that goes to the motor.
do this for each window you want.
If you want it on the UP motion just see which is LIVE when going UP, and coonect as above.
The window will go down fully after a BRIEF press(one touch) but if held will just stop as normal when released, and it will stop if you press again whilst going down on it's own.
tabetha