Right update time. 1st thing was I picked up my freshly polished turbo compressor housing



Also got my small turbo inlet manifold, i've drilled and tapped for all the sensors etc as well







next thing for it is to be sent for powder coating along with my thermostat housing again, as I have had to get a dash fitting welded to it so I can aeroquip from it to the heater.

next was to fit the turbo to manifold and then get the whole lot bolted up to the head



changed the actuator for a more bufty one



Removed the modine and fitted an oil takeoff sandwich plate



then got onto welding on brackets for my oil cooler, sorry for the pics my camera on my n95 no longer seems able to focus properly





then the cooler fitted in place



and pipework all connected





the other end



last but not least i did some more work on the breather system and connected up the last hose, I aslo trial fitted the inlet manifold to make sure everything would clear







Next is wait for my cam and cover to come back from Reyland the st manifold and thermostat to come back from the powdercoaters and get them fitted and then I can bolt everything else back together