This was spec, engine was rebuilt before I bought it so can't tell you the comp is sorry


Power engineering Low comp 1600cc CVH, +0.5 oversized Mahle Pistons, Lightened and balanced, with machined flywheel, ARP big end bolts
Power engineering stage 3 big valve head +1.5mm oversized inlet and +1.0mm exhaust valves; gas flowed, ported and polished, with matching inlet
Piper 285T Cam
Piper Vernier pulley
Double valve springs
Anti Pump lifters
Genuine Ford head gasket and head bolts
Stage 3 oil cooled Cosworth spec hybrid turbo 55 trim wheel with a 48-exhaust housing
-31 Actuator
3 Way Bleed Valve
Power Engineering Chip
Rev limiter raised to 7200rpm
Aquamist MF2 5th Injector using Cosworth green injector
Baileys DV26 dump valve
K&N Induction filter
Pace large front mounted intercooler with reverse charge carrier
Samco and Roose Motorsport silicon hoses
NGK 9 plugs
Ford Motorsport leads
Cosworth Fuel pump
Deflex poly bush kit
Baileys Header-tank and oil separator
Fusion Fabrication, cam cover, heater box, catch tank, servo cover,
Chrome Inlet, Rocker cover, and other engine detailing