Thread: RS2000 question
View Single Post
Old Mar 12, 2008 | 01:02 PM
  #12  
stuey650's Avatar
stuey650
Wahay!! I've lost my Virginity!!
 
Joined: Jul 2007
Posts: 61
Likes: 0
Default

Originally Posted by rs nuts
cheers for that , ive just been told too unplug the idle control valve aswell when running
and it should stall , if not i have an air leak ,and mine dosent stall, so i have listened around the inlet manifold and yes i can hear hissing around the injectors
been told too renew the rubber o rings around the injectors , have you heard off that before

sorry for the hi jack on post , but it may help your mate out aswell , as i have been told this is a common problem on these cars
Yes this is common and you can't get the O rings from ford no more. Apparently B&Q sell rings that fit though. The other thing to try is to take them out, freeze them , then dunk them in boiling water and refit. This can soften them up enough to seal the injectors again.
Reply