Originally Posted by
NEIL A
Ben what shafts are you running ? Im going to be fitting compression stuts soon along with my adjustable tca's so will be needing to get my front end set up.
On the top mounts i think the design is good but just a few simple mods could make it a bit more reliable, simple through bolting into a heavyer load bearing ring under the strut top.
You CANT "simple through bolt" though mate, as the bit you have to bolt through in order to make this transfer the load to the right place really is too bolt right from the top down, Ie onto the camber adjuster down to the shell, and if you do that, then its not adjustable anymore, you would be better off just getting a standard setup and drilling new holes for it to fit where you want!
People keep trying to come up with a quick fix to change the fundamental flaws involved in bolting this on the top, you CANT ever do that and still keep the way in which these are adjusted, you would have changed them so much that there wouldnt be any components of the original design left. What you need to do, is simply use some that bolt up properly underneath in the first place.