View Single Post
Old Jan 13, 2008 | 04:09 PM
  #8  
focus st2's Avatar
focus st2
Too many posts.. I need a life!!
 
Joined: Jul 2007
Posts: 507
Likes: 0
From: ireland
Default

Have taken loads of sets off of ST fiesta's and the focus and its simple really. Just use a heat gun and warm the stripe's you want to remove. Dont heat the bollox out of it because you'll damage the paint underneath. If you heat them properly the stripe should leave no glue trace's on the car. If there is some glue left over just use some degreaser/panel clean or tar and glue remover.
Hope this helps
Reply