i bought this head to get some porting and polishing done for my car,i hunted for ages to get a good one with plenty meat left as i wouldnt want to spend a grand on porting for it to be useless after a skim

totally standard,complete except cams,(can supply 2wd standard if needed)

came from a standard 4x4 saph with 67k miles

only had 1 skim

been inspected and measured by machine shop myself 138.76/86 one of the two will have to check

all valves guides etc fine

but after discussion with AVA and GGR im better useing a 2wd head due to my compression/pistons etc so