Originally Posted by dave cos4x4
RWD_cossie_wil
all that spec on your car and you are only doing one or two track days.
your asking Mike for specs and settings etc...just for the road,certainly up to you what you want bt imo its all overkill for the road.
must be some nice roads around your area.
you will not be off the track once you are on it,you will find the money.
i really want to see your car on track,so please try to get it on.
When I read your reply, I was about to say the exact same thing. If it is going to be mainly a road car, then my recommendation would have been keeping the standard front end, Koni's, Ahmed springs and a 6 deg rear beam - job done.
You have moved so far away from road car settings, that you will find it very difficult to set up for comfort.
As to a fast road setting:
Front:
Camber 1.5 deg neg
Castor 3 deg 30 mins
Toe-IN 2mm
Rear
Camber as per front
Toe-IN 3mm