Originally Posted by RickyLee53
Originally Posted by Chip-3Door
Originally Posted by AlexF
LOOKS GREAT!
But will a mini with red wing mirrors pass you at bedford??
Probably, at bedford I will be running on wastegate pressure only (if its even run in by then to go at all as still got a lot left to do) which is only 0.7 bar
As Martin said, with that gate positioning and a 38mm gate i don't think you'l hold 0.7bar, i reckon its going to creap as you get towards top end.
My manifold flows very well towards the gate, and i struggled with a 38mm gate to hold 1.4 bar, it crept to around 1.6 at top rev's. (GT35, Strokered Evo)
Still though, only 1 way to find out, awesome car, what exhaust housing is on the turbo? 0.63?
Is the screamer going into the exhaust?
I ran a similar take off with if anything a slightly less waste gate bias angle on a GT30 manifold and managed to hold 1 bar perfectly (as seen in the map sensor data log).
What turbine housing were you running on the GT35? I know some of the GT/HKS hybrid evo turbos seem to run very tight exhaust housings eg Hks GT25/40.
I guess we will just suck it and see.