Originally Posted by Mark Shead
Originally Posted by NEEDFORSPEED
Originally Posted by Mark Shead
Originally Posted by NEEDFORSPEED
where have you put yours? get your pics up. thinking of modding my gear knob but need some different ideas
If you add a wheel speed sensor to it then you can have launch control permantly on as it will only work below a certain road speed, You can also add a switch also to this to turn off, or have a button that you press and hold for launch.
Mark
brilliant ive used a sensor of an xr2i 16v that goes on the speedo cable. tested it this morning whenb i powered up ecu testing everything and works spot on so that answeres that! well impressed with the autronic btw! thanks!
If its hall effect then it can be wired in no problems, Use HSI3 for the road speed input.
Mark
yep done that already just have to play with the wheel revolutions to get it right.one less thing to worry about then. il just use a switch for on/off
Batt Voltage Dwell time
8 Volt 7 ms
10Volt 5.5 ms
12 Volt 4.5 ms
14 Volt 4.0 ms
16 Volt 3.0 ms
does that sound right to you for coils? got it off a guy on the bba remon site he said that should be fine?