Cheers for the replies!


I re-checked the fuses today and they were all intact and then started pulling the column plastic surrounds off. It turns out the hazards were working, but the indicators were not.

Next was the flasher/sender unit here:


Again, I replaced this and tried the indicators again. They still wern't working but I could hear a noise, almost like the crackling you'd hear when trying to tune an old radio between stations.

I also found that the indicator would work intermitently when I pushed / applied forward pressure to the stalk rather than just push it as normal.

Though after a couple of tries, this stopped aswell

I'm quite confident with working on cars (no mechanic though) but am very bad with electrics.

What do you guys reckon I should be trying after the flasher unit I did today?