Ok i was almost finished and then i made a misstake by clicking the site away
So here's my storie again!
I bought the car when i was 17. I bought the car with a broken gearbox. Just before i got my licience the complete car was ready!
So the other gearbox went in and waxed the car before going for a cruise
After i went to the european ford event with the car i decieded to make some adjustments to the car. And propobly some of you guys know how that goes. You see everything that's not right and everything has to change wenn you start working on it. That is how it went over here.
started stripping down the car
Then the moment was there that i decieded to finish the job nicely and do everything that wasn't right in my opinon. So everything had to go on the car!
Then there was to much rust!
So bought lots of replacement parts, because a good friend of ours that is always working on oldtimers that are worth a fortune, is going to do the welding. So i'm really glad that he's going to do my car!
I bought some 90 spec bumpers, spoiler because someone who's stupid replaced it for the normal (90 spec on papers)
In all that time there was also time for the engine. I took the engine out because is was smoking a bit. And my nightmare came true. Turbo was dead! So bought a new en stronger turbo last week. Then there was a flowed and tuned head on internet so went a in the car to pick it up. The guy claimed a 180 bhp with normal turbo pressure.
Then i brought all the engine stuff to a engine specialist and said i wanted to get everything good. So everything is like new expect the pistons, because they were replace before i bought the car.
The guy measured everything and did all the work, so i got a real proper engine now! Spend some but you get some!
Respray for looks
almost a new head
Flowed
i got quite a lot of stuff also for the engine but i list them on the end.
Because i'm working alot on the car and spending losts of money for a student!! i wanted to get a proper look so all the parts get a respray! it's a hell of a job but i hope the result will be stunning!
So the list of stuff that i bought for the car!
- the diesel mounts for enigine and gearbox
- Cosworth fuelpomp
- adjustable koni's front & rear
- lowering set eibach
- oilcooler
- 3' inch exhaust system RVS front to back
- Rebuild turbo with lots of adjustments like bearings housing
- polyrubbers front and rear
- new header tank
- breading set
- -31 actuator
- cosworth brakes front
- changed camshaft
- flowed head
- APR conrod bolts
- and more!
I'm going to place some updates over here till the whole car is finished