Originally Posted by mechanic28
Originally Posted by coswurv
Originally Posted by mechanic28
Originally Posted by coswurv
Originally Posted by KSA-Cossie
I used 10mm cable and a 40a rated relay,i ran a positive and a negative.
what positive through relay and just a negative wire straight from battery to pump ?
how u going to rewire your pump?
i'll probably go from battery positive through a 30 amp fuse, then i will use something like a good quality amp wiring kit cable to the spare wheel well, then t off of the knock relay thats already in there for my trigger wire, fix my 70amp 4 pin relay in the boot and connect the wires up, as for negative side i will probably just earth the pump to the floor, but im no expert im just going off what people have done and this is the conclusion ive come to.
cool i am going to use a 15/20amp fuse on the feed from the battery run it down the original course of the wiring bring the new wire up to where the cut of switch is and locate new relay there,then cut the wires coming from the cut off switch to the pump and use them as my trigger for the new relay(so it keeps the cut of switch in the loom for safety reasons!)then run the new feed down to the pump following original wiring then feed a new earth agian following original wiring all the way to the battery
same as me then mate, i see your location is london im only down in oxford (m40)