Tony;
I apologise for going off topic slightly,but i have a 909 front suspension setup comprising of 909 coilovers,grpa. 4x4 hubs,909 tca's,and 909 compression struts.,but i think the setup is for gravel as it was removed from nigel Worswicks old saff,and the bladed roll bar was not on the car when removed,but i remember the shell had the compression strut brackets bolted to the shell using original bolts,but also seam welded to the car.
i want to bolt the setup to my saff track car,but i was concerned about;
(A) Where could i get the brackets that bolt to the arb points for the compression struts,and
(B) Would i need a bladed roll bar for this setup on track,
as the car will have 180 bhp at most,and goes round a track o.k. on the standard stuff plus koni's.
I also have the rear setup of 909 coilovers,and rose jointed beam,plus i have a rear diff cover that incorporates the diff mount.
I really want to use this setup on my car for track days as i want to make the car go better,but i'm unsure if it is suitable.
Please help me.