Originally Posted by Stu @ M Developments
Cable should NEVER be tightened to the point you have no play.. slacken it back off until you have about 10mm play. An assistant will confirm you still get full throttle.
Stu, if I do that the butterfly is fully closed, there no longer is the 0.1mm gap between the body and butterfly plate. Is that what you would expect ?
Originally Posted by Stu @ M Developments
Just noticed this, thats a bad start as the 2wd TPS is open circuit at idle and the 4wd has low resistance. This causes the ecu to access the maps incorrectly at idle. However told you that works fine doesnt know as much as he thinks he does.
Either he was wrong or a ghost has been playing with my car - I haven't changed the TPS and the car ran perfectly fine before I had the head off.
Unfortunately I am in France again
for three days, so can't take a look until I am back. I'll take the TPS off again and check it's the right one.