The last time I checked for fuel from the injectors they were dry, since this I have tried to tow start it with no joy ! Then I took the plugs out and cranked the engine over with the flap held down, until the battery went flat, Then I have tested for fuel pressure and got soaked in the process, Although before all this there was no response to the throttle it would just start and tick over for a second then die, but last night I tried it again and had a little reponse from the throttle to about 1500rpm then it died. I will try another relay this weekend and check for leaks, keep the ideas coming. considering outing the mfi and in with efi. There is an Xr2i being broken do they use the same throttle body etc as the frst ? What parts could i use ?