Originally Posted by will4hattie
cheers fellas so u jus get the chip fit it then get it rolled and set up and should run 10 or 12 psi also where do u get the chip from and what one should i get the 165 or is there a 195 cheers
It you go for the 195 you will need fuel pump and injectors. When fitting the chip it is very easy you will need to take the ecu out the open it up to clean all the white grease off where the chip is pluged into. I use brake cleaner on a clean cloth onnce it's all clean refit ecu the plug the chip in never play with the chip when the car is on or and dash light's on as this will fcuk the ecu up