Yes

Steve,

Waiting on email for full spec, but roughly........

Ireland Engineering in the USA will do the exhaust manifold.
The head gasket will cope with 18psi and this would be good for a 325 to reach 340hp and a 328 to reach 370hp.
A complete rebuild using my own crank which would be knife edged
My own rods will do as they used corrillo`s in the e36 325.
Then new low comp pistons.
They will lower comp too around the 8.9:1
E36 injectors only work on around 65% so there is room for more power
New Headers
New ECU