Originally Posted by Alg1k
Have you put a dti on the fly wheel end and checked for runout.
Cheers,
i've just checked the flywheel.
it runs +/- 0.1mm out on the diameter, and +/- 0.30 on the back and front faces.
At the point its -0.1mm on the hieght its +0.3mm on front face, and -0.30mm on back face
At the point its +0.1mm on the hieght its -0.3mm on the front, and + 0.3mm on the back face
Which shows it has bent, and even if the crank has been straightern'd on the grind, the flywheel face hasnt.