Right this is my Engine out off The E30 Cosworth
Just to add this engine is from a late spec 4x4 saph with lambda (Green Top Rocker Cover) Green Sticker on L8 ECU

Ford Cosworth YB (200 Block) Engine Producing 361bhp, 354ft-lb Torque (Dyno Proven). on a MSD stage 3 conversion

The Engine has undergone a full engine rebuild Done 1700 miles (including 1000 running in miles) all parts where purchased via Matt Lewis Motorsport which included:

• -0.5mm Mahle Pistons
• 5 bar high pressure oil pump
• Big-End & Main Bearing (std size)
• ARP Big-End bolts
• Group A Head Gasket
• 16 valve guides & seals
• Cylinder Head was pressure tested and measured (138.92mm) had all valves lapped in using 3 angle valve seats, new camshaft bearing & seals
• New Gates Cambelt & Tensioner
• Freshly Painted Rocker Cover
• All new gasket and bolts where used

The engine is fitted with a 2wd sump, and the unions for a oil breather kit (as seen in Pictures)

Please note this is for the complete Tall Block Engine & WILL NOT include:
Inlet plenum, Turbo & Manifold, Thermostat housing, PAS pump & Alternator.

However it does include: AP 6 paddle Clutch, cambelt cover, engine mount arms & brand new coolant temp sensor

All other parts from the engine are being sold seperatly

For the engine complete
£2000.00

For Genuine Interest Please CALL ME: 07725 106612
Please DON'T send endless Emails & PM's when a quick phone call can answer all you questions in 1 go

Here are some Photos