BIG difference, as it has less castor so is more twitchy, but grips better turns in better too, got to hold on though not very relaxing a bit like a mini/go kart for twitchiness!!
The other way is to use a spacer between the TCA bushes and the butt where it stops on the end of the roll bar thread.
I made some 10 + 15mm spacers like a "C" shape so you could just loosen roll bar/tca and insert then tighten up, so spacer goes between tca/bush and end inner stop/butt up of roll bar, so it pushes the wheel slightly further forward.
tabetha