Hi,
Had a rolling road power run and my car is seriously under performing. I was expecting some thing around the 300bhp mark but 207Bhp was a real disappointment . That’s what the Standard Car Pushes out...
The Engine has a Grp A Head, L6 ECU with 803 Ahmed Bayoo Chip, 4x803 injectors,T3 turbo, Bailey breather, New HT Leads, New plugs, Grp A coil, New 3bar Map Sensor, New Air charge, New Water Temp, New Phase Sensor, Dizzy Cap & rotor Arm. etc.. Checked the timing 16 degree before TDC at idle ive fitted a turbosmart dual boost controller with the low setting at 1bar and the high setting at 1.6bar. The problem seems to be the boost is kicking in very late at 6000rpm. How would I go about getting the boost to come in at a lower rpm? The only thing I haven't had checked are the CO and the Air/Fuel Ratio...