Originally Posted by need4speed00001
To set the throttle pot ,follow this guide.
4) THROTTLE CLOSED:
4x4: Check for DC voltage less than 0.5V between pins 11 and 17.
Strange part here is that I have got a service manuel were this is discribed as 'at idle you should have around 0.6 Volts'. But I am not sure its a manual made by Ford.
What I do find interesting is what is matters if the value at idle is more to zero than to the 0.5 Volt. Mines at 0.2 Volts. What differents could this make in the CO adjustment?