Is there any benefit fitting a BD10 Inlet cam to this spec and if so what are the advantages and disadvantages.
I will retain a standard exhaust cam

YB 8.0:1 Compression
P8 With Coil Pack and Closed Loop
T34. with a 55 Housing and GT32 compressor wheel/360 bearing/step seal
Siemens Blacks 55lb
500 Cooler, Filter / Exhaust e.t.c

I will obviously have to send me chip back to Stu to allow for the BD10 if i fit.

Will it help or not.
Will it be more laggy

According to Kents website its range is 2500rpm - 7000rpm

Any help appreciated