yeah its easy mate undo the cowling then take the horn out of the steering wheel, undo the nut in the centre then wiggle the steering wheel off after that has comme off just pull the alloy hub off that the wiper stalks etc bolt to then push the steering wheel back on so it can be moved then under the ignition barrel is a little pin that can normally only be pushed in when the key is inserted and on the first click then you just pull the barrel out but beings that you havnt got the key just punch it in with a hammer and punch but not to aggresive and the barel will slide out and fit your new one from ford or the scrappy as long as it has the key with it