Originally Posted by bassboy
OFAB will fit a mondeo no problem
the GT25 will see about 280hp...maybe a touch more but i wouldnt be confident pushing it more without seeing a compressor map
modeo sensors will be ok IIRC...but need to double check
rods should be ok at 280hp
I have 3 2wd cossie intercoolers welded up and ready for action here if your interested?
management is your choice...cheapest will probably be OFAB leading onto the likes of DTA, OMEX, Cossie management, Gotech etc
block needs oil return welded in and possibly new breather port depending on what exhaust manifold you use
head gasket - Late Focus multisteel one...year 2000 IIRC finish code 1071744
Clutch - i have an AP Racing paddel clutch kit here if your interested..brand new never used will easily see 300hp all day long...we specc'd it for my engine so you will have no issues whatsoever
exhaust - Simpson racing custom exhaust would be awesome
failing that, a 2.5-3" bore exhaust will be fine
standard box will be fine with that power if its in good condition...might wanna consider a strip down and rebuild plus a Quaife ATB diff
bassboy
ofab what is need to fit that will that run the rs focus stuff?
ofab is the rs turbo stuff and that will link up with the std mondeo sensors and std inlet manifold etc ?
also how much would the mangement cost and how easy is it to fit and wire in also what happens with the std mondeo loom and ecu do i keep them there and splice into that or not will need a guide dont want to fuk up a £400 loom lol
also with ofab manifold can i run closed loop lamda control etc ?
gt25 is good for 280bhp thats ace
http://cgi.ebay.co.uk/FORD-FOCUS-RS-...QQcmdZViewItem
as for dv will something like use can it be used or not ?
http://cgi.ebay.co.uk/Ford-Focus-RS-...QQcmdZViewItem
std rods good for 280bhp
what is need to do to them to make them safe ?
to achive that 280bhp also they need to be modded to the c20lets pistons
where could i get them ?
also what size bolts need been looking at these
http://cgi.ebay.co.uk/ARP-ROD-BOLTS-...QQcmdZViewItem
http://cgi.ebay.co.uk/ARP-ROD-BOLTS-...QQcmdZViewItem
as for exhaust a custom one with 2.5 ins or 3ins straight through or a piper one with same diameter pipe
will it be ok to run a highflow cat to ?
simpson racing where is that ? (you got a website addy ?)
so the block needs a oil return welded in and possibly new breather port depending on what exhaust manifold you use
how hard is it to have the oil return put into the std block and can a engine builder/maching shop do this ?
also will i need to fit the breather pipe in or not if iam running rs focus std manifold
manifold choice
http://cgi.ebay.co.uk/FOCUS-RS-MANIF...QQcmdZViewItem
can get the gasket through work
gearbox only done 64k will that be ok will i still need to get hold of a atb diff
which clutch would you recon mend
been looking at this
http://cgi.ebay.co.uk/FORD-MONDEO-ST...QQcmdZViewItem
as for boost pipes been looking at these are they any good ?
http://cgi.ebay.co.uk/UNIVERSAL-INTE...QQcmdZViewItem
found this for intercooler
http://cgi.ebay.co.uk/FRONT-MOUNT-IN...QQcmdZViewItem
also found these would the be any good with ofab man
http://cgi.ebay.co.uk/FOCUS-RS-INJEC...ayphotohosting
http://cgi.ebay.co.uk/Ford-Focus-2-0...QQcmdZViewItem
thank you bassboy been great help
sorry just have to keep pesting you just need as much info as i can
could you take a look at the links see what you think
thanks daz
