Thread: Misfire at 3500
View Single Post
Old May 21, 2007 | 01:39 PM
  #2  
tabetha's Avatar
tabetha
20K+ Super Poster.
 
Joined: Jul 2006
Posts: 24,596
Likes: 4
From: uk
Default

Set plug gaps to 0.6mm, then fit group a coil, as the oe ford one is crap.
Next do the wiggle test on the connections particualrly the CPS CONNECTOR.
Check your CO you want around 2-2.5% CO at idle, look at chip to see what it is as this could be a bad one.
As it is a track car I would without doubt get a fuelling check done under load.
tabetha
Reply