Righto i have a wee problem.

Cossie head needs skimmed after a melt down.

Current head depth is 137.53 mm.

According to cossie workshop manual minimum depth is 138.68 mm and thats with a max of 0.13 mm machined off.

Now 0.13 mm is 5 thou. My head measures almost 40 thou UNDER the MIUIMUM limit!

So wtf is going on? could my head really have been machined soooo far over the limit?

Can anyone confirm that 138.68mm is minimum head depth?


Heeeeeeeellllllllllllllllp


chop