Old May 13, 2007 | 03:29 PM
  #37  
davidreader5's Avatar
davidreader5
PassionFord Regular
 
Joined: May 2004
Posts: 466
Likes: 1
From: south wales
Default

Hi,

I set about using cosworth management for my restored RS turbo
which i did all the work myself, from body restore inc respray to building the engine, i used jano for advice for the cosworth management as not many companys doing the conversion, now i had spent a lot of time and money on my car, and i have worked and chipped several cossie's,
so i decided i would design my own kit for cosworth management (disc's for crank signal and a disc for the phase sensor signal, etc) so all i needed
was a chip?? and jano supplied a chip for the setup of my engine ie yellow
std injectors cvh std engine and turbo, i caught him out on a lot of technical issue's and it seemed like he was getting info from somewhere else and by the time he had typed it to me he made mistakes, i doubled
checked the setup info to jano and he said definitely the chip was correct,
i have been doing cars for 20+ years and have had several RST, so i had the chip check by a very good known tuner by one name he would be known, he checked the chip and it was for 803,green injectors and the rest of the chip file were very poor(rubbish who wrote the chip) jano couldent even tell me what the ignition if checked timing should be at idle,
who ever wrote the chip should know, i dident get into a slagging match by saying what the tuner said, i just knew from the mistakes i had caught him out with and new from then stay clear, i still have the chip here and his email saying it is definitely correct for my setup?as proof. so pay your money and take your choice so i PAID £75, for a copy of a chip which you can burn to a blank chip which cost £1, for a chip which could of damaged my engine after all the time and money spent on it,


Regards Dave R.
Reply