HI Guys
Thought i'd post this here as no-one seems to know what the problem is in the escos room...
Basically, i've got a problem with my ABS light - now normally when you turn the ignition on, the light will illuminate, and then turns itself off again. Mine is not illuminating at all.
I've just fitted a MSD coilpack conversion, and the car starts as it should, and all the other lights illuminate correctly when you turn the ignition on bar the ABS light.
Has anyone expirienced this before? - I can't for the life of me work out what the problem would be.
The light does illuminate when you disconnect any one of the 4 wheel sensors. It also comes on when you disconnect the top of the ABS gubbins on the n/s inner wing.
The only wiring that i have touched to fit the DIS are the ones that are needed. The supressor to the coil has been removed, and soldered, as per the instructions on the MSD pack.
The only other thing that is slightly odd is that i've not had to mod the rev-counter to make it read correctly - it reads correctly as is, but i'm aware of other posts saying that they have had too...

Can anyone point me in any other direction where to look as this is becoming more than slightly annoying, and i want to get this solved ASAP so I can book the car in for a set-up.

Failing that, would Fords be able to out the car on their tester, and diagnose the fault at all?

Cheers

Rich