Originally Posted by JjCoDeX75
Originally Posted by Chip-3Door
Stoich is still 14.7, thats still the "chemically correct" mixture.
But that would be too hot a burn, so is no use, and would not give good power, so is no use.
12.5/12.6 is the point of peak power, this is what you want to be running if you are able to without heat issues, on a YB though, high 11s is as close as most people go for safety reasons.
Though 14.7:1 is satisfactory for low/small load situation (ie closed loop situations)?
Cheers
JJ
14.7 is fine for light loads, 15.2 is perfect for economy.