Originally Posted by jungleistmassiv
Originally Posted by YoungDan
You need custom mounts, gearbox etc if you're transplanting.
You sure? late xr2i/rs1800 mounts should work.
Yep, pretty sure...
Originally Posted by jungleisssssttmassivVv!
Originally Posted by YoungDan
The standard engine (IF it's a Zetec-SE, i.e a black top, not silver, as this has differences in the head, and bottom end)
What are the sifferences? I thought they were the same. I have stripped down both a zetec S and a zetec SE, and they appeared to be both the same internally
Posivitive. They don't recommend repro'd cams with the silver top. They use some sort of washer which is prone to "toppling over" when used with shims. Something like that anyway
Jon @ ShawSpeed also tried fitting a phase 1 crank to a phase 2. It wouldn't fit.
There are minor differences, but the phase 1 (silver top) shouldn't be used with repro'd cams! the phase 2 is fine.
