Ever since I have had the car it hasnt wanted to straighten up on its own so once all the above work had been done we started to do some work to improve it. We measured the castor angle and found that it was 2 degrees so after overhauling the column we wanted to increase the castor angle as much as possible. Unfortunatelty the bottom arm was already mounted as far as possible on the anti rollbar so we were left with 2 options. Move the top mount or move/extend the anti rollbar. After having a look around decided to buy blanks eccentric top mounts and cut the inner wing to move the centre point as far back as possible.

heres some before pics.