Originally Posted by 2wd
Originally Posted by stonehavencossie
Originally Posted by JanDK
Originally Posted by costina
Originally Posted by 2wd
Originally Posted by costina
Thats what i've gone for MSD closed loop greys and coilpack
I think its very good and hat off to Stu and kenny for making greys fuel right on tickover
Used to run a level 6 and it was overfueling big time !!!!!!!!!!!!!
Is it a DIY chip or a Live map setup you are running ?
And what are your spec's and approx power/torque ?
Its a off the shelf chip done to my specs:
std comp,T34.63,coilpack,escos chargecooler...
Would hope to see around 380+bhp @ 28 psi held
32 psi peak
But i'm building another eng so should have lower comp
Correct me if I am wrong.. but 28 psi and standard compresion... Its alot of boost???
sounds dangerous
not if its a strong engine and a decent head gasket
im peaking at 30 and holding 28 as per MSD setup
so when saying strong engine, do you mean new or....and what gasket are you using ?
no doesnt have to be new. my isnt. only a tuner will be able to tell you how 'strong' it is. GRP A gasket or better ie. anything other than the standard one