Originally Posted by 2wd
Originally Posted by jon@work
mount a relay in the boot area (I mounted mine where the fuel cut-off switch is)
take the original fuel pump feed wire off the pump to pin 85
run a new wire (doesn't have to be heavy gauge) from pin 86 to an earth point
run a new 30-35A wire, with a 40A fuse near the battery, through the front bulkhead (with a grommet) to pin 30
run a new 30-35A wire from pin 87 to the fuel pump
run a new 30-35A wire from the pump to earth
Hi...why do you put the feed to pin85 and the earth to 86 ?? I thourght that you normally put ++ to pin 86 and earth to 85 ??
can be either - that's just the way I normally wire up relays