A very nice piece of kit the GReddy - it will work on any Turbo engine.

Set up is very quick and easy - set the 'set gain' to about .2bar under what you want to run, then use the 'set' to get your required boost level - use the higher gears to find this.

Finally play with the gain to reduce boost spike to an acceptable minimum - in the lower gears a spike of .1 - .2 bar should be OK.

Thats all - it has 2 levels so set up the lower one for daily driving, and the higher one for when you need an extra kick.

Run the solenoid as near to the turbo as possible but away from any heat.

Highly recommended - these can handle up to about 2 bars of boost without problem.



BTW GReddy is pronounced similar to 'ready' (but how Tony the Tiger might say it) , not like 'greedy'.