Originally Posted by Garage19
Surely the new code is 1/100th of a ms (0.01) not 1/1000th (0.001).
Where can the high res code be found? Are there many people running it?
If you do not have the smaller injectors backing your fuel pressure back down to 3 bar (43.5psi) will help increase the pulse width at idle. Are you measuring the base fuel pressure with the vac/boost ref pipe taken off the regulator?
Pressure measured with no vacuum pipe
Hi Res code here
http://home.comcast.net/~kgrider9982/saab/hr_08g.zip
http://www.msextra.com/viewtopic.php...er=asc&start=0
This is what one of the writers of the new code put
Originally Posted by boost junkie
I basically merged the original "high res" code for the MS1 cpu with 'extra. It does have 0.001ms resolution. The timer channels are being used in output compare mode.
There aren't any bugs that I know of at this time but I don't think all the functions have been tested...