Originally Posted by Maki
Originally Posted by Micky
I think its safe to assume that the Mondeo brake calipers and/or disc's are different to the Cossie one's,as no way do you need to drill hub carriers or put in 8mm nuts to offset the calipers when fitting the 4x4 Cossie stuff.
You think or you know? Proof me it's diferent
And to all those who think that there is some danger or it's done is some bad way I can say, that they do work and on very very hard conditions. So relax
I know, ShandzS1 has even posted on this thread that only 1mm spacers are required.Plus every time 4X4 Cossie calipers and Cossie 2WD discs are mentioned on Passionford its always with 1mm spacers,not fecking 8mmm nuts!!!!
see here too,Maki
https://passionford.com/forum/viewto...ight=2wd+dicss
Also look at
www.escortrsturbo.co.uk No one over there is using 8mm spacers on their Cossie 4x4 caliper and 2wd brake conversions!!!!!