God damm mother f**king sh*thead - sorry about that outburst, some numbskull that had the car before me came across the problem before with this car, he decided to put a blob of silicone on the matrix to repair it. It was still slowly leaking and recently got worse hence why I noticed it. So for god knows how long there been a constant slow trickle of water down the drivers side foot well the result of which is a huge 18 inch by 4 inch section of the floorplan rusted through!
This now of course takes priority on my to do list when the car comes off the road at the end of the month. What would be the best course of action, considering the car is getting stripped down to (A) cut it out and weld in a repair section or (B) replace that side of the floor plan?