well lads just got back froma rolling road set up and this is the result

179.9bhp

178of torque


mods:

superchipped ecu
pro alloy front mounted
kent cvh 35 cam
and pully
t3 hybrid with .48 exhaust
mongoose full system
-31 actuator

ok, so we ran the car and got the fueling spot on first making sure she wasnt leaning out before upping the boost , all i waas able to run was O.8BAR seems to be the actuator its screwed right up and its peaked and held 0.8 bar .....

next wee set up the cam it ran a 168 before the cam was dailed in and then it ran 179 so happy with that ...

so it made 179.9bhp on 0.8 bar of boost not bad .....just worndering why when a -31 is screwed right up did it only make 0.8 with no leaks as system was all tested for leaks and its a new actuator as well ???