Nick,




Kev,

FYI the S8 is a 32 bit processor and has resolution to 1 microsecond in the
maps but you dont need to know that as its possible to type in the exact
time you need as you probally know. !

Minimum injector on time is the minimum time the injector is allowed to
be in under any conditionsn except during deceleration overun cut off.

It is used to program the minimum on time (all makes off injectiors have this)
which is the point when they dont flow any fuel below a certain pulse
width time and/or tehy become unstable on delivering fuel.
This is a mechanical limit iof the injector.

Generally this parameters is used on large injectors mainly.
Its used to ensure the engine gets fuel when injectors are run in that
region of fuel not being delivered at idle to prevent engine stalling.

If you dont want to use it then set it to zero to disable it !