Originally Posted by Phil DJ
I'll check the width of the wheels then. Am i right in saying that et35 offset is probably the wrong offset aswell?
Standard offset is ET37 i believe.
Im runnig 7x15" Alloys with 45 profiles and i get VERY slight rubbing on full lock - this is with an offset of ET35. The alloys are ET40, but they rubbed badly on the shocks so im using 5mm spacers.
HTH
Im ordering a set of 6.5x15 ET37 alloys soon - wil be interested to see if they rub or not - i doubt they will with an extra 2mill of clearance and half and inch less width.