Originally Posted by richm
Originally Posted by dangerbrian
Originally Posted by richm
while you are about it, disconnect the 3 connectors on the bulkhead behind the engine, and check that the contacts are clean, pay special attention to the one nearest the battery with larger wires in it, disconnect and plug it back together a few times to clean the contacts.
will give that a try cheers but will not use wd4o
good advice from Gracey
WD40 has NO place in electrical components!!!
Had the same prob with mine greased up the 3 concetors ran prefect after no more miss fire
and you can by the elec contact grease from ford
Finis 1122540 around a £10 for a big tube
