Originally Posted by Rab
Originally Posted by mikee_rs
Originally Posted by Rab
No you don't mate. You have ET35 rims at the moment
Cossie rims are 7" wide. Rolling arches is a pile of piss mate. Bit of heat on the paint, a dolly, a small hammer. tap tap tap.
cossie rims are 8 inches wide
SAPPHIRE cossie rims are 7x15........................................
Only silly people put ET25 8x16's on thier Fiestas
I'm fairly sure AGAR wants his fiesta to go round corners.
He has 4x4 Sapph sharktooth 7jx15" ET35 alloys. Thank you and goodnight
I was under the impression they were ET40 cossie rims - as i asked here, only one reply though could be wrong:
https://passionford.com/forum/viewto...934&highlight=
But i did require 5mm spacers on the front to stop the inner lip of the alloy from rubbing on the suspension struts - ie bringing down the offset to ET35 i believe?
If what you say is right then the front offset wil now be et30 - i am confused
But its looking promising about the width though, i have bugger all rubbing with them.
Ive heard some bad reports on the weakness of Superleggras, and Rab you know how poor the roads are about here, hoping ultraleggras will be stronger - anyone know? Want to get these ordered asap!
Oh and Mike this is why
