first of all, the fact i was going to use it for doing trackdays is besides the point, the propshaft bolts and diff bolts still need to be in place!!!
sure i was keen to pick the car up on the date you said it would be ready, but does this mean i should expect it to be dably thrown together?
in my opinion i wouldnt want an engine built by someone who would rather fill sump bolt holes with instant gasket than do it properly.
the wheel nuts fitted wernt the right ones and four were missing, it didnt have the polly bushes that you said it had and it didnt have the low compression pistons either as i later found out when it had to be rebuilt!!!
the 4x4 oil pump was not changed for a 2wd one and had been rubbing and worn 3/4 of the way through.
o and i found canabis in the glove box.
after bringing the car back 4 times with a 100 mile round trip each time i decided to get it done properly elsewhere and chalk it down to experience (a bad one at that).
i now feel the car and talking about it has wasted enough of my time.
good luck with the engine build b6mgb, hope u have more luck.